Assembly Video 


You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Building Manual

Facts about the EZ Log system

Manufacturer Warranty

EZ Log Assembly Tips

  1. ​​This all natural construction is efficient, and has virtually no waste. Home packages are delivered to site with components pre-cut. 
  2. Kits are not assembled and require on site construction. Kits are designed for concrete slabs, but can be installed on skids to make portable.
  3. ​All material is a northern spruce grown in a cold climate, creating a tight grain and is the most accepted and stable material for log construction. 
  4. The wood has been kiln dried to 16% moisture content and can air dry to less than 14% prior to milling. 
  5. ​In higher wind or earthquake regions, 3/8” stainless steel rods can be inserted through the purlins and the entire height of the wall. This ties the purlins to the building. 
  6. ​To meet local snow load requirements the number of purlins can be increased and the height of purlins can be increased by stacking 2 or 3 high. 
  7. The wood must be sealed on the interior and exterior wall surfaces immediately following assembly. 
  8. Buildings are not insulated and in climates that require insulation should be installed.
  9. The manufacturer provides a limited warranty on their product.
  10. ​Detailed drawings are provided with each order.
  11. Click here to view Return/Cancellation Policy